LASER HOLOGRAM DEMETALIZATION
For long years we offer laser hologram demetalization. Year after year, demand for this product increases and we came to the consistent decision. The equipment we have designed has no analog on the market, combining high speed with high resolution. Two working modes are possible: Start-stop and Marking on the fly. The software supports vector and raster formats. You can mark stickers and hot stamped holograms.
ROLL-FED UNIT
Automatic feed
Automatic positioning
Automatic tension control
Automatic web guiding
Splicing table
Slitting module
Two rewind unit
| Marking field | 180 mm x 180 mm |
| Maximum marking speed | 1 frame/s |
| Marking on the fly | up to 6 m/s |
| Maximum web width | 210 mm |
| Maximum roll diameter | 360 mm |
| Air expanding shafts | 3'' |
| Machine dimensions | 1700 x 1100 x 1900 mm |
| Weight | 300 kg |
| Power Supply | 6 kW, 380 V, 6 MPa |
LASER SYSTEM
The main process provide diode-pumped solid state laser with high efficiency and low cost of operation.
| Wavelength | 1064 nm |
| Pulse frequencies | 0 - 100 kHz |
| Spot size approx. | 40 µm |
| Focus depth | 2 mm |
| Scanning head | 180 mm x 180 mm |
| Focus length | 254 mm |
Pilot Laser - integrated laser diode beam for the simulation of the mark with visible light
Operating System PC Windows. Marking Software includes the following functions:
- Graphical user interface (GUI)
- WYSIWYG marking preview
- Supporting formats: HPGL, IGES, DXF/DWG, PCR, BMP, TIFF, JPG, PCX, TrueType
- 20 standard fonts included
- 17 most common barcodes